Banner produces a wide range of safety-related products, including safety light screens, safety interlock switches, and e-stop and two-hand control safety modules.
Banner MULTI-SCREEN Systems are micro-processor- controlled opposed mode light screen systems which use two pairs of sensors to provide point-of-operation guarding for two areas on the same machine.

Banner Duo-Touch Two Hand Control Safety Modules

Simultaneous action of both hand controls generates an output signal; if either hand is released, the output signal from the DUO-TOUCH is cancelled and cannot be reestablished until both hand controls have been released, and simultaneously actuated again

Sentrol Safety Switches

Sentrol industrial is a market leader in the development and manufacture of non-contact safety interlock switches for industrial applications.
Whether it's a new machine design or a retrofit to increase operator safety on an existing machine, Sentrol Industrial provides the best fit for your application.
The 301 and 303-BT (left) are stainless steel, highly defeat resistant switches that are ideal for harsh environments and wash-down applications. They are CE compliant.

Larco Safety Mats

Simco Technologies is your local source for Larco safety mats. Larco Industrial Mat Systems offer unparalleled durability and versatility for your machine safe-guarding needs.
Impact resilient, abrasion resistant and totally submersible, Larco mats set the industry standard for reliability and durability in the harshest industrial environments.

Bircher Safety Mats

Contact safety mats are pressure sensitive devices that detect workers or objects in dangerous areas around industrial machinery. Depending on the application, detection results in either a machinery stop or the prevention of a machinery start. Together with an ESD3 controller contact safety mats offer a reliable safety system with the controller providing the interface to the machinery or motor controls.

Banner E-Stop Safety Modules

Monitors normally-closed emergency stop switch circuit for a contact failure or wiring fault
Multiple redundant output switching channels for connection to control-reliable power interrupt circuits
For use in functional stop category 0 applications per NFPA 79 and EN 418 (ES-TN-1Hx models also qualify as functional stop category 1)